InnoGUARD™ is the “new generation” in ENC coatings
The coating is stronger than previous ENC products … up to 900 Vickers Hardness (greater than 68 Rc).
The adhesion (bonding) is much better than previous and competitor ENC products – it does not flake or peel when mechanically impacted or when exposed to abrasive or highly corrosive environments such as steam, H2S, CO2, oxygen, brine water and high chlorides. Most of our competitors use off-the-shelf commercial solutions and these ENC formulas are not scratch-resistant and often experience failure such as peeling or flaking. We offer a LIFETIME NO FLAKING OR PEELING GUARANTEE!
Our coating process is eco-friendly. It does not contain toxic additives like previous generations of ENC, or as other coatings such as epoxy, polymers and chrome. Our process does not contaminate the environment or give off toxic fumes.
If corrosion eventually occurs due to excessive wrenching or extreme abrasive factors, the corrosion never penetrates between the InnoGUARD™ coating and the substrate. Any small amount of corrosion remains localized to the damaged area only and the rest of the coating does not peel or flake off.